Kind health to you! With you Gennady Malakhov, and today I want to touch on one of the most common topics about intimate diseases. It's about hemorrhoids and how to treat it.
Hemorrhoids are inflammation and enlargement, as well as bleeding and loss of internal venous nodes of the rectum plexus. According to official figures, every seventh person in the world suffers from hemorrhoids, that is, about 15%. But this is only official! Not every person immediately turns to a doctor with this illness. We can assume that a quarter of the world's population faces hemorrhoids!
And this is all due to the fact that most people have such a stereotype that it is uncultured to talk about diseases of the rectum. Therefore, people turn to a doctor only when the disease passes into a neglected stage and the patient gets tired of fighting it. Hemorrhoids refers to diseases that often affect both women and men.
Who is at risk?
Hemorrhoids can be earned by each of us. But especially the one who leads a sedentary lifestyle, suffers from constipation or obesity, dabbles in anal sex, eats too much smoked, spicy, salty and spicy. Or even someone who engages in heavy sports or works in hard work.
About half the population has hemorrhoids by the age of 50. In addition, often hemorrhoids occur in pregnant women. This is due to increased intra-abdominal pressure. In addition, the birth itself is also a provoking factor of hemorrhoids.
Stages of hemorrhoid development! Dangerous!
Many postpone the treatment of the disease, tk. think that she will pass, or feel embarrassed to go to the doctors. And this is in vain! Degrees of development of hemorrhoids:
The first stage - hemorrhoids increase, itching, burning, sensation of foreign body in the anus, there is a slight discharge of blood during emptying. Since these symptoms are not permanent, but only occasionally, the vast majority of patients at this stage of hemorrhoids do not go to the doctor, the disease goes on to the next stage.
The second stage - When defecation begin to "crawl out" nodules, on toilet paper regularly appear drops of blood. At this stage, the nodes themselves hiding back immediately after the stool or in a short time.
The third stage - Drop out nodes the patient has to put his hands in the rectum to achieve a more or less comfortable state. At this stage, the disease is already seriously progressing and requires immediate attention to the doctor, since the nodules begin to fall out not only during defecation, but also at any increase in intra-abdominal pressure (coughing, sneezing, lifting weights and even with little physical exertion).
Fourth stage - hemorrhoidal nodes no longer fit or drop out immediately after repositioning, look like a grape brush, very inflamed and painful. At this stage, bleeding is very common, and the pain in the anus is so strong that it is impossible to touch it with toilet paper. Intensive frequent bleeding leads to anemia, which further worsens the patient's well-being.
Probably, you are now in perplexity, and you are asking yourself the question: "Is it possible to cure hemorrhoids completely?"
Yes, and you will be surprised even more when you find out how easy it is to do!
Traditional medicine comes to the rescue
To all this did not happen and not to feel discomfort from the inflammation of the hemorrhoids, it is necessary not only to remove the symptoms of the disease itself, but also to cure it completely. Than to be treated? There are a lot of drugs for treating hemorrhoids today, but not all of them have high efficiency. I recommend my patients recently.
This cream appeared relatively recently, but has already managed to prove itself well. I will say even more, he made a small revolution among the means of hemorrhoids, setting a new benchmark for effectiveness. Now many doctors include it as a primary means in treatment courses from hemorrhoids.
Not only quickly removes the symptoms of the disease (pain and discomfort caused by hemorrhoids, they are already a few minutes after application). But it also normalizes the circulation of blood in the pelvic area and strengthens the walls of the rectum, thus preventing the appearance of nodes in the future (it is the "decrepitude" of the muscles that is the main cause of hemorrhoid development). After the course of treatment with this cream, the hemorrhoids passes completely and does not appear again after a while. Also, the cream can be used to treat anal fissures.
On average, the treatment of hemorrhoids with this cream, depending on the stage, is 1-2 weeks. Hemorrhoids in the initial stage is literally in a few days, pain in a few minutes, and bleeding in a few hours. An important advantage is also the duration of exposure. In the early stages of the disease, it is sufficient to apply 1 time per day (for example, it is possible in the morning before work), and in advanced cases - 2 times a day.
Worth a cream wax is very inexpensive and is available to all. Read more about the cream-wax HEALTH can be on the official website Remember! Like any disease, hemorrhoids are easier to cure at an early stage. Do not run it and take care of your health, which is very easy to undermine and much more difficult to restore later!
Interview with subscribers and viewers
Dear subscribers and viewers of the first channel! We want to ask you to participate in our survey to understand what hemorrhoids treatment methods you used and what you can advise the others.
What used and can you advise from hemorrhoids?
Traditional medicine
Comments on the article:
Konstantin.
Being far from the Internet shopping all the same made an order, like nothing complicated. I received a cream wax in a week. While plainly it is not clear, but after 10-15 minutes of pain instantly disappeared. Later, I will write down the results. Thank you, Gennady!
Maria Mishina
I gladly read your articles Gennady, thank you! Fortunately, I do not have hemorrhoids, but I'll take note :)
a guest
Hello everybody! I want to express my deep gratitude to Gennady Malakhov for this transfer. My husband was shy, decided to buy it for him. Thank you very much, they will say so that the result is!
Mikhail Kovalkov
And here I DO NOT BELIEVE! for me it's so impossible to cure hemorrhoids if you just smear some kind of cream or ointment.
a guest
Recharged with a positive from your article. I hope that this one will help me. Has ordered, promise, that approximately in a week will come by mail.
a guest
And will it help me if the hemorrhoids are more than 7 years old?
Wall building materials are used for the construction of walls of a bearing type, wall partitions, as well as for the construction of facades of buildings and structures. Modern walling materials perform several functions simultaneously: the basic building, provide the creation of microclimate, heat saving and aesthetic appearance.
To create a practical, cozy and warm home, special attention It is necessary to give the choice of materials from what to build the walls of the house. The optimal option will be materials with a proportional combination of decorative and functional properties. In addition, an important factor is the cost of wall materials. To choose the optimal wall materials, it is necessary to make a comparison of wall materials with identical properties that meet the requirements.
Building wall blocks combine such properties as low thermal conductivity, high resistance to atmospheric influences, as well as aesthetic appearance. When building low-rise private houses, it is advisable to use gas silicate and foam concrete blocks. The warmest materials for the walls of the house are blocks of cellular concrete and ceramics. The hollow brick also has good heat-saving properties. As a rule, modern wall materials allow not to perform additional decorative finishing.
For a country house with year-round living optimal materials for the construction of walls are blocks and bricks. The use of modern wall materials can significantly save time and financial construction costs due to the speed of installation and the lack of the need for heavy foundations. A one-time investment in warm walls will not let you worry about heat loss and eliminate the need for additional insulation.
The site presents a wide list of manufacturers of wall materials, and specialists will help you to choose and buy concrete wall blocks. The use of modern building materials will not only keep the heat in the house, but also protect it from dust and fire.
On the portal site in the relevant sections selected information about different wall materials, as well as the prices for wall plates. In addition, by contacting supplier companies, you can get advice and apply for the proposed product range.
The choice of material for walls should be justified not only in terms of economic benefits and architectural and design solutions. It is also necessary to take into account the purpose, that is, for what walls is it supposed to purchase material (load-bearing, self-supporting or non-bearing walls), fire resistance, heat conductivity, moisture resistance and other characteristics of wall materials. After all, on the right choice depends on the period of unattended operation of the house and the safety of its occupants.
The following requirements are imposed on the walls: they must be
stable and durable;
do not support burning (and, ideally, be fireproof);
provide energy saving of the building;
have noise-absorbing and sound-insulating properties;
provide a comfortable microclimate; not to release toxic substances;
have a certain longevity;
have adequate resistance to heat transfer;
be economically viable;
constructively comply with modern methods of construction.
Type walling materials are subdivided into stone, wooden and combined (so-called "sandwiches"). Local materials can also be used. Stone walls can be by the way of erection masonry, large-panel and monolithic.
When performing masonry, the seams between individual wall stones are filled with masonry solutions. To create a more monolithic and stable system, the rows are placed so that the vertical seams, whose thickness should not exceed 1.2 cm, do not coincide. The method of such masonry is called "bandaging". With a two-row dressing system vertical seam coincides in terms of the series. Modern technology for the production of wall stones makes it possible to perform a thin-walled masonry in which the seam thickness is several millimeters.
As masonry solutions use cement (simple), as well as cement-clay or cement-lime (complex) mixtures. They have good plasticity, hygroscopicity and are economically profitable. Most often, ready-made dry mixes are used, which are diluted with water in place. In thin-laying masonry glue is used, thanks to which there are practically no "cold bridges" and the masonry solution is saved.
The most common in the construction of modern low-rise buildings such walling materials As a ceramic and silicate brick, as well as small wall blocks.
Ceramic brick has been used by mankind for more than two thousand years. It has frost resistance, good heat-insulating properties, ecological compatibility, strength and durability. Ceramic bricks are made using semi-dry and plastic pressing methods. The method of plastic molding includes the following stages: a continuous bar of raw clay, extruded on presses-ekruderah cut into bricks. The raw brick thus obtained is dried and then fired. When using the semi-dry pressing method, the clay in the drying drum is dried. This process takes 5 to 10 minutes. Then the resulting mass is ground into a powder and molded at a humidity of 8-10%. The brick obtained by this method does not require additional drying and is sent directly to the baking oven. Wall ceramic materials (bricks) are full and hollow. The latter have increased heat-saving properties.
Another, more "young" but no less popular modern wall material - Silicate brick has almost the same characteristics as wall ceramic materials. The production of wall materials from air lime, quartz sand and water was massively established at the beginning of the 20th century. Silicate brick is much cheaper than ceramic brick, which explains its popularity. Moreover, this kind of bricks can be colored by introducing pigments into the mixture, which can not be done with its older "colleague".
Small wall blocks in composition are divided into silicate, gas silicate and expanded clay concrete. The use of small wall blocks provides an opportunity to speed up the construction process, save on mortar (more than 50%), reduce the cost of work (which has a favorable effect on the cost of housing in general), increase the useful area (due to the reduction in wall thickness), reduce the load on the foundation. Small blocks are used in the construction of buildings no more than three floors.
The most important issue, which so often asked a huge number of people who are venturing construction and builders - the price policy of the material and its good quality. That is why modern builders began to actively use for partitions undeservedly long-forgotten gypsum boards.
Restructuring internal walls apartment in the past, turned an apartment into a construction site. The need to knead mortar, to drag bricks, to lay them, it all still lives, like a monster in the view of those who want to remake the internal structure of their apartment.
Modern walling materials for the construction of walls, created by the principle of Lego, have transformed the movement of apartment walls into pleasure. The provided wall materials wholesale and retail, completely change the approach to the redevelopment of premises.
Gypsum boards are an excellent solution for building walls in a room, and blocks of cellular concrete are the next generation of long-used bricks. The use of hollow gypsum blocks facilitates the installation process itself, because they are lighter in weight by a quarter. In this case, there is no difference in strength from full body. All plates and in general, all sold materials for the construction of walls, have a uniform size of 667x500x80.
This is very important during the works - all the elements will be exactly the same to each other, when rebuilding the wall there will be no problems with replacing the removed plates. Gypsum blocks differ in moisture resistance, but they always have a good sound-absorbing effect - 42 dB.
The quality of the sold wall materials for repair, this is the credo of the trading house "Torg-Story". Perfectly sized gypsum blocks of the firm have a lot of brand extensions from the manufacturer, which makes installation of any wall as easy as possible. Smooth, angular - for all the moments of construction, tools and components are thought out. Weigh repair walling materials a little, so that only one worker can erect an entire interior wall in one day, which lowers the cost of work.
And, finally, if it is necessary to replace or erect outer wall, perfect solution these are blocks of cellular concrete. These wall materials for external walls have a very flat surface, when laying between them there will be a minimum gap and a cement layer that conducts the cold in the room in winter is not used.
Trading house "Torg-Story" is engaged in the sale of a variety of wall materials. Plates full and hollow, moisture resistant and for living rooms from 194 rubles / piece. Buy wall materials in our company can be a private person and a construction company or a repair organization.