Granulated cleaner for pipe cleaning. A tool for cleaning the pipes of which firm to choose.

Cope with blockage can be in various ways: chemical products based on acids and alkalis, soda ash, plunger or plumbing cable. But the main pledge of cleanliness is cleanliness and timely prevention. For allergy sufferers and asthmatics, products based on living bacterial cultures are suitable. And the best solution for the private sector will be preparations for septic tanks. How to choose a means of blockage in the pipes and how to use it we will tell you in the course of the article.

Each landlady must have faced a clog in the pipes, the situation is very unpleasant. Let's spend a couple of minutes to figure out the reasons for this problem:

In the kitchen sink are the remains of food, skins from vegetables and fruits, bags and other waste. All is exacerbated by a large amount of fat washed into the sink and lime coating covering the pipes from the inside. Put a grid on the drain hole and conduct a weekly preventive maintenance or means for cleaning the pipes.
In the sink of the bath hair and hair of domestic animals fall. The advice is the same: a mesh and prevention.
In the toilet are foreign objects, hygiene products, a filler from the cat's toilet, paper and clogs. Use the plumbing to the destination.
Incorrect pipe installation. If during construction of communications the builders did not consider it necessary to observe the correct slope of the pipes, then they will be clogged regularly. In this situation, there is only one way out - to remodel.

Clearing clog

We have already written about how a plumbing cable, and today prepared a short review of household chemicals designed for cleaning pipes.

Industrial products

The choice is quite wide, in every hardware store there are at least 20 names of such products. How to choose the right tool for cleaning pipes from blockages? What is the most effective drug? What is better than a gel or liquid? Will the pipe be damaged? We will try to answer all these questions.

What are

Means for cleaning sewage pipes produce four types and there is no sense to argue which of them is the best, each has its own pros and cons:

Liquid is very convenient to use in case of strong blockages. A disadvantage can be called a large expenditure of funds.
The gel is heavier than water, it slowly envelops the inner surface of the tube and flows down, directly to the plug. If the sink is filled with water, the gel will not dissolve and will not lose its properties. Very sparingly consumed.
Powder - often sold in small bags, for one cleaning, it is very convenient.
Granules - in quality are not inferior to other products, loose, well spread on the surface, they are convenient to use.

What is in the composition

Most often, the composition of means for sewage includes active acids or alkalis. Alkaline compounds readily dissolve fat and organic residues, they are ideal for the kitchen. Acid is effectively cleaned of soap deposits and limescale so it is more often used to remove blockages in the bathroom.

Many housewives are worried about the question: "Will the sewer pipes ruin the facility?". Products are developed by professionals, they usually take into account the impact of components on different materials.

Carefully read the instruction, in it the manufacturer reports whether it is possible to use the means for pipes made of metal or PVC. If you are not ready for unscheduled repair, do not exceed the exposure time of the substance.

Precautionary measures

Such drugs are rather caustic, so make sure that children or pets do not reach them. Ideally, if you have a special cabinet for hazardous household chemicals, which is locked with a key.
Do not store household chemicals in the same closet with food.
Observe the dosage and exposure time.
Work in a ventilated area, do not inhale vapors.
Use gloves and keep the bottle away from your face.
If the product has got on the skin or mucous membranes - rinse with plenty of water and collect in the clinic.
If the product has been swallowed, allow the victim to drink 2 liters. water and hurry up to see a doctor.
Flush the product directly into the drain hole, make sure that it does not splash in different directions, caustic components can spoil the enamel and chrome plumbing parts.

Attention! Strictly follow the instructions, it was written by specialists for your own good, only by observing the rules of using household chemicals can you expect a good result.

Overview of popular tools

Mole (Russia)

This tool was used by our grandmothers, which indicates its effectiveness. At this time they produce "Mole" in the form of liquid, gel or granules. This alkaline agent perfectly copes with fatty deposits and lumps of organic debris (food, wool, hair).

Ingredients: sodium hydroxide, potassium hydroxide, prepared water, surfactant and EDTA.

Instruction:

Pour a teapot of boiling water into the drain
Shake the contents of the vial and pour a glass of the drug into the drain hole.
Leave for 1-2 hours.
Open the tap and rinse the remains of Mole with plenty of water.

If after the application of "Mole" water is still badly off, then use the air valve, the pressure easily pushes the softened plug.

Tiret (Poland)

A thick gel flows down the tube, envelops and softens the cork. Suitable for plastic and metal pipes. Eliminates unpleasant odor and disinfects.

Composition: chlorine-containing bleach 5-15% and non-ionic surfactants, sodium hypochlorite.

Instruction:

Pour 3 liters of boiling water into the sink
Pour half a bottle of Tiret
Depending on the degree of contamination, the exposure time varies from 5 to 30 minutes.
After the expiration of this period, repeat the paragraph number 1.

Cons: not economically, a pungent smell, does not always cope with the task.

Flup (Greece)

Another good tool for eliminating blockages in plastic pipes. It is sold in convenient bags of 60 g. at one time. Mistresses note the ease of use, cheapness and good effect. A red bag is poured with hot water, and a green one can be poured in and cold.

Ingredients: caustic soda, sodium nitrate, perfume, color.

Mode of application:

Pour the contents of the sachet into the sink.
Pour a glass of boiling water.
After 15 minutes, open the tap to wash off any debris and pellets.

Cons: can not be used for toilets, can spill up, so do not lean over the sink, a sharp chemical smell.

Bagi "Pothan" (Israel)

A thermonuclear granulated product that allows cleaning the blockage in just a few minutes. During use, be extremely careful, there is a violent chemical reaction with a pungent odor, do not lean over the drain. Strictly observe the dosage and exposure time.

Ingredients: sodium hydroxide, surfactant.

Instruction:

Remove water from the sink and drain hole, from the mesh to the water should be at least 5 cm. It is convenient to do with a syringe or a rag.
Fill it with 100 gr. facilities.
Wait 3 minutes.
Pour a glass of boiling water into the hole.

Cons: very corrosive, try not to get the product on enamel, acrylic, cast marble or corrugation.

«Mr Muscle» (Ukraine)

The products received a lot of praise from the hostesses. Mr. Muscle copes well with the clogs in the kitchen and in the bathroom. Thanks to a soft formula, the product can be used for acrylic bathtubs, it will not harm plastic and metal pipes. Does not have a strong smell, but it takes more time to get results.

Ingredients: filler, sodium hydroxide.

How to use:

Remove water around the drain hole.
Pour the sachet into the drain hole of the tub or sink
After 30 minutes slowly pour into the sink a glass of warm water, and then for a few minutes open the tap. In severe soiling, leave the product overnight.
Repeat the procedure if necessary.

Cons: quite expensive.

Probiotics

A number of drugs, the action of which is based not on chemical reactions, but on the vital activity of beneficial bacteria. Such products are well suited for home use, are not toxic. Safe for health, do not have a pungent odor, can be used in apartments where allergy sufferers and asthmatics live. Such products are represented by trademarks: Binatec, Chrisal, HD Unblocking, Probiotica in Progress (PiP), etc.

How it works: useful bacteria, getting into the pipes, destroy the blockage. They feed on food residues, fat, destroy harmful microorganisms and unpleasant odors. Over time, the beneficial microflora displaces the pathogenic.

Symbiotic microflora protects the pipes from corrosion and prevents the reproduction of putrefactive microbes and the flowering of water.

Lactic acid bacteria, acid bacteria, bifido- and lactobacilli, as well as auxiliary organic substances are used as a working crop.

How to use:

Shake the bottle several times.
Prepare the working solution according to the instructions.
Pour into the sink and leave for 12 hours (for example at night).
For better efficiency, the treatment is carried out several times.

Folk remedies

If you prefer to use "grandmother" reliable and safe methods, then you will need one of these recipes:

Recipe # 1

Remove syringe with stagnant water, pour a half cup of soda ash into the sink, pour in a liter of boiling water and leave for half an hour. Then open the tap and drain the water, it will wash off soda residue and cork. This method is suitable as a weekly prevention of blockages.

Still with the help of soda ash it is possible, as well as to make the grate of the gas stove less dirty. Calcined soda can be replaced with conventional soda, but it needs twice as much.

Recipe # 2

It is this method that will help to cope with fat, lime coating in the pipe and remove any obstructions of any complexity. The only drawback of this method is the active isolation of toxic chlorine. Therefore, it is recommended to close the drain plug, go out for a while from the room and open all the windows wider.

So, let's begin:

Remove water with a syringe.
Fill the drainage hole with a mixture of food and soda ash, 5 tbsp each. each.
After half an hour, pour into the sink half a glass of 9% vinegar.
Then fill half a cup of chlorine bleach, if possible, close the drain plug and quickly leave the room.
After half an hour, go in and open the tap, make sure the water comes off, and then go out again.

When the water ishes off the bleach and soda residues and the room is slightly ventilated, you can use the plumbing normally.

Recipe # 3

To remove calcium lime from the pipe use citric acid. Pour 50 gr. acid in the drain hole and fill with a liter of boiling water. For the kitchen, this method is hardly suitable, but it is suitable as a preventive measure against blockages in the bathroom.

For owners of private houses

In the private sector, where there is no urban sanitation, septic tanks or local treatment plants are used, where feces are processed with the help of special microorganisms. Eliminate clogging of such a system with chemical preparations is impossible, this will cause massive death of microorganisms and will have to restore their population for a long time, which is financially quite expensive.

Therefore, only purifiers based on biological components can be used for pipe cleaning. The most commonly used solution is bacteria for cesspools.

How to use:

Prepare the solution according to the instructions.
Pour into the sewer.
You can not use the sewage system for a day, during this time the bacteria will have time to split fats and organic residues and soften the cork.
If the litter does not disappear, use the plunger, it will be much easier for you to push the cork, which the bacteria have already softened.

This simple method is safe for pipes and plumbing. As the active culture, the same bacteria that are used in the septic tank, so the main population will not suffer. It is important to remember that bacteria actively work only at plus temperatures.

Let's sum up: in case of a sewage blockage one can use a plumbing cable or a plunger, folk "recipes" based on acids or alkalis or an industrial remedy from the nearest household chemical store. For septic tanks we use only products with live bacteria.

Anastasia, March 12, 2017.

The sewage system is present in every house and structure, so that people can always use the toilet, hot and cold water. Despite the fact that now modern materials and technologies are used for installing systems, sooner or later the sewage system becomes clogged and has to be cleaned. Naturally, you can apply for help in a specialized service and pay a tidy sum for this, and you can use various means to clean the sewer pipes and do all the work yourself. The number and range of such tools is large enough, so it is worth exploring as much as possible in order to find not only the optimal and easy, but affordable option.

Note! To facilitate the process of cleaning the sewage system or even its absence, it is necessary to carry out preventive cleaning once or twice a year, the cost of which is several times less.

Clogs and their classification

In spite of the fact that in the sewage systems filter systems and gratings for sewage treatment can be used, dirt, oil and fats accumulate on the inner walls of the pipes. Accumulation of such contamination will lead to the formation of clog in the sewer pipe. The water will cease to pass through the sewage system and will have to clean up.

Note! To exclude the possibility of formation of blockage due to accumulation of precipitation, it is worthwhile to carry out preventive purification with the use of special means.

It is worth noting that for the formation of clog there can be other reasons:

Use of sewerage to get rid of plastic bags, bastards, dirty water, garbage, rags.
The deposits on the walls of pipes of soap and fatty formations, which will increase with time.
In old sewage systems, corrosion can form. The rough surface of cast-iron pipes clings a huge amount of debris, which leads to a delay in sewage.
Often, the cause of the formation of a blockage can be improper installation of the system, since all pipes must pass at a certain angle for a high-quality washout of the drains. In this case, it is necessary to carry out repairs.

Note! If there is an old sewer system in your house, it is better to change all pipes to plastic ones, which will improve the quality of cleaning in the future.

Depending on the type of blockage, you can determine the method and method of cleaning the sewer system from blockages. When choosing an effective and high-quality tool, all processes will occur at the highest possible level, even with a simple plumbing cable.

Chemicals for cleaning

In the modern world, almost all people use household chemicals. Household stores offer the most effective means for eliminating blockages in pipelines. So we can distinguish several basic types:

liquid;
gel-like;
powder;
granular.

All chemicals are divided into two large groups: acidic and alkaline. When using them, you can easily clean up even the most complicated blockages.

Note! Use such a tool is recommended only in the case of water passing through the pipes, otherwise chemicals can damage the surface of the sink, bath.

When choosing a tool, you need to take into account a lot of nuances, for example, if you clean pipes in the bathroom, then you can use acidic products that will quickly cope with soap pollution, and in the kitchen - alkaline agents will quickly eliminate fatty raids. Each such tool has a designation, where it should be used and how to use it.

Cast iron

In addition to the fact that corrosion in such pipes is quickly formed and spreads corrosion, there is another problem: in the production of internal walls are poorly processed, so the rough surface quickly collects debris. The best means for cleansing is "Mole" and its analogues, which are produced on the basis of caustic soda.

Note! When choosing the means for cleaning the sewerage from cast-iron pipes, give preference to gel-like chemicals, which will be solved immediately by 2 problems: blockage and unevenness.

Pipes made of steel

It is worth noting that such material is used quite rarely, most often it can be found under the sink as a stylish tap. Since steel is a fairly common and simple material, it can withstand the action of any chemical reagents. To qualitatively and quickly eliminate blockage it is enough to use "Mole" or modern gel-like means.

Polymer pipes

When installing modern sewer systems in a private house, specialists use exclusively polymer pipes, which are durable and unpretentious. Smooth and smooth surface of plastic elements does not undergo rust formation, nor do they deposit silty deposits inside.

Note! Use acidic drugs is strictly prohibited, as they corrode the polymer. The best option will be an alkaline base.

In hardware stores, you can consider this option to clean up blockages, like "Robik K-67", which is environmentally friendly and safe to use.

Use of chemicals

Each manufacturer on the packaging of their products prints a detailed instruction on the application, but there is a standard scheme:

Before starting the cleaning process, ventilate the room well and leave ventilation if possible.
Pour the amount of liquid indicated on the packaging into the drain hole in the toilet, bathroom or kitchen.
We wait for the specified time, so that the reaction will take place as qualitatively and fully as possible.
After the pipeline is thoroughly washed with water under a strong head.

Note! Do not forget to use modern methods of safety - hand gloves, which will prevent chemical solutions from entering open areas of the skin. If the product has got on your hands or face, then it is necessary to wash the skin with water.

The simplest ways

If there is no opportunity to buy a chemical to remove the blockage, then you can use the improvised means at home, in most cases they will also bring the desired result.

One of the most common means is simple boiling water. This home remedy means flushing the system with hot (boiled) water, which can easily cope with soapy or greasy deposits. For this procedure, only one bucket of boiling water will suffice, which is poured directly into the sink.

Note! If the sewage system is assembled from polymer pipes in the house, this method will not work, because according to the manufacturers recommendations, liquids above 70 ° can damage the structure of PVC.

Another fairly simple folk remedy for cleaning up blockages is soda and ordinary vinegar. This will help only in the case of a small formation of raids, it is better to use them as a prophylaxis. For the whole procedure, you need a batch of soda, half of which you need to fill in the sink, then pour a glass of vinegar. This will give rise to a chemical reaction, under the effect of which a purification will occur. If necessary, you can repeat the procedure, and after - all rinse with hot water in large quantities, so that all residues are trapped in the drain pit.

That's how you can prepare an effective remedy for soda:

The last, but not less popular variant, is a vantuz. When using a plunger, it is necessary to close the hole tightly, otherwise the artificially created pressure will be weak and there will be no result. If everything is done correctly, the created pressure will very quickly destroy the clogging in the sewage system.

So, if you choose one of the above methods of cleaning the sewage sludge, you will soon be able to resume the full use of sewerage. If you have any questions about the topic, then write comments to the article.

Video

This video provides an overview of tools and tools for cleaning the sewer:

When the pipeline of a residential house is functioning properly and does not cause trouble, we do not even think about caring for it. But if there is a clog, we are ready for anything to make this horror end. How to do without unnecessary red tape and financial investments? For this, the modern market offers many household tools for cleaning pipes. Our rating will help you to understand what is the difference between the goods of this category and what product is preferable to buy. In the review, you will get acquainted with the top manufacturers of funds, evaluate the representatives of the rating and get advice on choosing the best product. Spend just a few minutes and rest assured of the product you purchased.

A tool for cleaning pipes of which company to choose

Among the manufacturers of household chemicals are not so many companies specializing in the release of funds for sewage cleaning. Information is presented in the form of a list compiled in descending order of product popularity on the modern Russian market:

1. Pothan

4. Selenium

5. Mole

6. Sanox

The above rating includes producers specializing in the production of household chemicals for a long time. In the product arsenal of companies there are liquid, gel-like and solid cleaners. The best means of these categories will be discussed.

The best liquid means for sewage cleaning

Products of this category appeared on the market first - in the last century a prototype of a chemical "cleaner" was created in the form of a liquid agent against blockages. The liquid medium is an ideal variant for the "habitat" of a solvent of any kind. And the secondary active components, for the most part, are represented precisely in such an aggregate state.

Means of this category are considered less effective, in comparison with gel-like, powder and granular. Many buyers also complain about their uneconomical expenditure. However, we still managed to allocate the best product from a number of presented on the market, however, only one.

The most budgetary option for cleaning pipes - Mole

It has long been a well-known reagent, which was successfully used even in Russian times. The venerable age of the means does not in the least belittle its qualitative characteristics. Mole to cope not only with blockage, but also with the wall of a pipe made of thermoplastic material. That's the effect! Why is that? Yes, because the Soviet "cleaner" was made with the calculation of its use in thick metal pipes, and not in the flimsy polymer products of the modern type.

The democratic price of a product often becomes the main incentive to purchase a product. Yes, and use the contents of the bottle is very simple: the whole liter of liquid poured into the sewer in the evening and washed off in the morning.

Supporters of the domestic product distinguish its following positive characteristics:

large volume - 1 liter;
low cost.

From the minuses of the product I would like to note:

absence of blocking from children;
an uncomfortable bottle - ordinary, without an elongated neck;
long period of waiting for the effect;
low efficiency at strong congestion.

Buyers are satisfied with the facility and believe that Mole is the best option from a number of budget products.

The best gel-like means for sewage treatment

Gel remedies for blockages have caught on to many owners of a clogged gutter. In addition to the effectiveness of such a "cleaner", it is worth noting its unique ability to guarantee long-term protection against the formation of new congestion. The gel not only cope with the cork of organic origin, but also envelops the tube from the inside. As a result, a thin film forms, which "slows down" the process of forming a new mash.

Best price / quality ratio - Deboucher

A highly effective tool that can cope not only with a small, but quite a strong mash. The composition of the product high-speed components: potassium hydroxide, sodium, chlorine, active additives. These components lead to an acceleration of the chemical reaction, which stimulates the process of resorption of the plug.

According to the instructions, the gel should be left in the sewer for an hour. However, in the case of light obstructions, Deboucher will solve the problem much earlier. The effect of using this inexpensive gel is comparable to the effectiveness of advertised drugs. Many housewives use the Deboucher for preventive purposes, and not, as they say, when the thunder has come.

Among the obvious advantages of the described product:

good efficiency;
low cost;
absence of a sharp odor;
convenient container;
do not eat away plastic;
availability of protection from children.

As cons, you can consider:

uneconomical consumption: at least one half liter of gel is used at a time;
chlorine content (not suitable for use in aluminum pipes).

Buyers are satisfied with the facility. His dignity clearly prevails over shortcomings.

The best gel for the prevention of traffic jams in the sewer - Sanox "Pure sink"

Amphoteric surfactants predominate in one of the leaders, which account for about 30%, followed by sodium hydroxide. We love owners of clogged canalization due to their "soft" action. It has a pungent odor, so try not to inhale it. Strangely enough, the gel is kept with respect to modern pipes.

A staggering effect in the case of strong congestion should not be expected from Sanox, but it is very reasonable to apply it for preventive purposes. An inexpensive, easy-to-use tool that will help keep your drainage clean and tidy. The contents of the bottle is enough for 2 full-fledged uses.

Let's note the main positive aspects of the gel:

the possibility of use for all types of pipes;
low cost;
availability of protection from children.

As defects of the goods were:

uneconomic consumption;
long period of waiting for the effect.

The Sanox gel "Pure Stock" received a good evaluation of consumers. Most buyers consider this product to be the best tool for the prevention of blockages.

The best granulated sewage treatment means

An uncompromising effect can be guaranteed only by a granulated product against blockages: it will cope with the stopper and will not harm plastic or metal pipes. The instant effect of such products is due to the high concentration of "cleaning" components in the granules. The loose mixture is very easy to dose, which not only ensures its economical consumption, but also guarantees the integrity of the pipe and seal.

The most qualitative product is Chirton "Clean watercourses"

The basis of this product is caustic soda and sodium nitrate. In appearance, these are blue granules that react quickly with water. Chirton is one of the most worthy brands whose products have proven themselves in the market as an effective and relatively safe product of chemical origin. A sufficiently sharp smell of the agent may be a little embarrassing, however, it very quickly disappears.

Chirton "Clean gutters" cope with the organic cork in just a quarter of an hour. The product is realized in small bags, designed for one application.

We note the main advantages of the product:

high efficiency;
one-time packaging (there is no need to store a chemical substance);
low cost;
absence of chlorine;
fast effect.

Of the shortcomings:

periodic lack of goods at the outlets (in this case the goods can be ordered from the online store).

Customers' opinion about the product is positive. Many users consider the tool the best among analogues.

The fastest means is recognized as Bagi Pothan

The basis of the described agent is caustic soda, as well as surfactant. The composition of the product determines its rapid effect. "Work" the pellets begin at the slightest contact with water. The remedy is truly effective, but rather caustic. With Bugs Pothan you will need from 3 to 5 minutes to say goodbye to the ill-fated blockage.

Such "heavy artillery" is intended for use in case of serious blockages. To combat minor traffic jams in the drainage or for the purpose of their prevention, we recommend buying something more delicate.

One can not help but dwell on the following advantages of the means:

instantaneous effect;
economical consumption;
availability of protection from children;
convenient form of container (there is a "nose").

Some buyers noted a number of product shortcomings:

excessive cost;
a large amount of packaging (there is no possibility to purchase a disposable product);
causticity (contact with hands, eyes and respiratory organs);
it is unacceptable to use for old pipes.

In any store of household chemistry in our time, you can find several types of means for cleaning sewage. But which is better to buy, not everyone knows. And in this article I will try to give the chemical preparations as objective an estimation as possible, to tell about their capabilities and to teach the reader to choose the best available medication independently.

Operating principle

First let's try to understand how the pipe cleaner works.

All without exception preparations contain alkalis or acids, effectively dissolving organic substances and fats.

The specific type of active substance can vary:

"Mole" in the form of a powder contains 40-60% sodium hydroxide NaOH;
Corrosive soda in about the same quantity contains Pothan in granules;

The action of an aqueous solution of caustic soda on the organics is a match and a paper tube.

The composition of liquid drug "Tiret" includes up to 15% of chlorine bleach (sodium hypochlorite). In aqueous solution it is converted to hypochlorous acid HOCl.

Alas, the possibilities of drugs are limited only by organic compounds. Moreover: to dissolve fats and organics, the agent must contact with the blockage throughout its volume, which in reality is practically unattainable.

Efficiency

How to determine which is better than the funds offered to you?

It's very simple: the most effective is the drug that contains maximum amount of acid or alkali. It is obvious that the granulated Pothan with 60 percent sodium hydroxide will be more effective than liquid Tire containing no more than 15% sodium hypochlorite. Information on the composition of any means for cleaning the sewer is always on its packaging.

The composition of the liquid preparation "Mole".

When using strong drugs, be prepared for violent chemical reactions - boiling and splashing. Protect eyes and skin: alkalis and acids in high concentrations cause chemical burns.

Not only specialized means

A little bit earlier I mentioned that the Israeli means for cleaning the sewage system of Bagi Pothan effectively dissolves any organic matter due to its high content of alkali - caustic soda. It is worth a granulated drug, however, it is quite expensive: a 600 gram package will cost the buyer 550-650 rubles.

Meanwhile, caustic soda is freely sold in many hardware stores at a much more democratic price - from 27 rubles per kilogram. Only under a different name - "caustic soda".

To destroy organic and fatty blockages, you can use any solution of alkalis and acids. The higher the concentration, the more effective the drug will be.

In the course you can start:

Electrolyte for acid batteries;
Concentrated acetic acid;

Citric acid in sachets.

Causes of blockages

And now let's remember what causes blockages in the internal sewerage system, and try to evaluate the possibilities of household chemicals in each specific case.

Releases and siphons

Releases of baths and showers are most often hammered by hair and hair of domestic animals. An honorable second place in the frequency of the clogs caused by it is sand. He gets into the releases and siphons first of all with dog paws when you wash them after a walk.

Wool and hair are dissolved by acids and alkalis, but it takes quite a long time - up to 6 - 8 hours. The sand, of course, completely ignores your efforts: it tolerates prolonged contact with aggressive drugs without any harm to yourself.

In the siphons of kitchen sinks there remain small food waste that has passed through the grate of the release, and fat from the plates. Chilled fat turns into a waxlike substance that reliably covers.

Both types of blockages can be dissolved by household chemicals, but there is one problem here: for a large amount of clogging, the drug will only contact one side of the plug that appeared in the sewage system. If the siphon or knee is completely clogged with fat, the chemical will again be powerless.

Pipes

Sewer pipes in apartments are usually clogged with the same fat. Settling on the walls of pipes, it gradually reduces the clearance in them to zero. Fat dissolves rather easily in chemically active media, but only with a small amount of clogging; Meanwhile, in practice, the length of the fat plug is rarely less than half a meter.

Fat is the main cause of obstruction of sewer pipes.

Toilet

The use of a toilet bowl for its intended purpose never leads to problems.

All the blockages that were encountered in my practice were caused by an attempt to use it for the disposal of what is not the place in the sewage system:

Food waste (cereals, vegetables, fruits, etc.);
Paper (toilet paper towels, newspapers);
Fillers for cat litter (including clumping, based on clay);

Household and construction debris.

From all this list, "Mole" or "Mr. Muscle" are able to cope only with paper and food waste.

If chemistry is powerless

What can be used for blockages that are not amenable to the action of household chemicals in principle or make its use ineffective?

Clean the release of the bath from hair, wool and thread the easiest way with a thin plumbing cable that can pass through its grate. The cable is fed into the outlet with continuous rotation and wraps everything that hangs under the grille. The tool extracted from the sewer is cleaned of the shaggy "beard" with the aid of an acute knife; The cleaning should usually be repeated 2-3 times.

In especially neglected cases it is better to completely remove the outlet grille by unscrewing the screw holding it. Plastic releases with a cross-shaped grille are twisted by pliers: their sponges are inserted into the grate, and the handles are used as a lever.

Remove from the siphon of the bath or shower booth sand and other small debris can be a normal air vent. Pour a little water into the tub or tray of the booth, cover the outlet with a plunger and press it several times. If the plumbing fixture is overfilled, do not forget to plug it with a wet rag or sponge - otherwise the plunger will be wasting the air between overflow and discharge.

Siphon under the sink or wash basin is easiest to disassemble, having unscrewed its bottom, and to shake out above a garbage can.

Fat plug in the sewer pipe is cleaned with a plumbing cable. A rope is launched through the socket that is closest to the intended site of the blockage. When the water is gone, do not rush to celebrate the victory: the remaining fat should be washed away with plenty of hot water, draining it for at least half an hour.

In the summer, when the temperature of hot water drops to 40 - 45 degrees, flushing the sewer with it will be ineffective. The clogged sewage system is best disassembled and shaken out above the garbage can; cast iron pipes will have to be cleaned, repeatedly passing the place of the blockage with a cable with a brush or wound at the end with a wire.

How do you clean the clogged toilet bowl with your own hands?

The instruction depends on the cause of the clog:

Paper, food waste and small debris can be squeezed into the sewer pipe, creating a hydro shock. This can help a fairly large air intake. If it is not, fold several times a wet floor cloth, lay it on the water mirror in the toilet and sharply press the rag with a mop or brush handle. Instead of a plunger, you can also use a plastic volume of 2 - 2.5 liters with a cut off bottom and a twisted stopper;
Filler for cat litter based on sawdust and small household rubbish can be washed off with a large amount of water after cleaning the toilet bowl with a plumbing cable;

Construction debris, caking filler and dense food waste can only be removed from the toilet bowl by hand, wearing long rubber gloves and excessive squeamishness.

Conclusion

As you can see, from household chemical goods one should not expect too much. In addition, the most expensive drug is not always the most effective. To find out more about how to clean the obstructions of household sewer, you can see the video in this article. Waiting for your additions and comments. Successes, comrades!

Almost every person faces a problem when a shell or bath is clogged in the house. To clean them, you need to have some special tool that allows you to quickly get rid of clogging.

But before buying a cleaner for sewage cleaning, it is necessary to understand how the cleansing process takes place, as cleansing substances act. Only the right choice will achieve the maximum effect.

This is what this article will discuss.

Practically in every store, in the department of everyday life, you can buy chemicals for cleaning sewage pipes.

These drugs have long enjoyed great popularity. They eliminate the corks in the pipes, dissolving fat and decomposing other substances. As a result, the patency of the pipes is completely restored.

Bulk material are sold in the form of granules or powders. They contain very strong chemical compounds. Work with such substances requires compliance with security measures and maximum caution. Each product is hermetically packed in a thick plastic bag. Its contents are designed for only one cleaning.
Liquid detoxification products are also very popular. Such products are offered both by domestic manufacturers, and foreign. All chemicals are in sealed plastic jars. They include ingredients that help whiten and remove unpleasant odors. In addition, such chemicals can be used for disinfection.

Before you buy such a chemistry, you must first find out the composition of the drug, carefully read the instructions on how to use it. Of course, liquid preparations much quicker clean the sewage pipes, but the price of such funds is much more than a chemical powder. Determine an effective tool for cleaning pipes.

"Mister Muscle"

This is the most advertised means for cleaning sewer pipes. It is mainly used as prevention and removal, small blockages. With it, you can clean pipes, dissolve hair and food remnants. In addition, there is destruction of harmful bacteria in the pipes. As a result, an unpleasant smell coming from the sewer pipes disappears.

"Mr. Muscle" is made in the form of a gel or granular.

Granulated, 70 gr. "Mister Muscle"

This is a disposable means for removing blockages that arise in the drain pipe. In half an hour he destroys harmful microorganisms and removes unpleasant odors. This means can be used to clean pipes from any material. Issued in a disposable package.

Weight -70 g.

It is made in Turkey.

Reviews

When I was plagued by drain pipes, I found two identical products in the store:

"Mr. Muscle", weighing 70 grams. which includes:

Special filler;
Sodium hydroxide.

The cost of the package is 46 rubles.

"Mole-Cinderella" is designed to clean pipes, weighing 90 grams. The composition is completely analogous to the above-described agent. However, the cost of the drug is only 10 rubles 50 kopecks.

Of course, 50 rubles money is not very big, but why pay four times, when the volume is much less.

In the package, there were exactly the same granules, white. Cinderella has a smaller granule size. After cleaning two completely different drain pipes, the effect was the same.

If you use the air vent, at the same time with the product, it turns out well. However, the efficiency of the cable is much higher.

Perhaps "Cinderella" is in the category of cheap products. I decided to get acquainted with the cost of other similar products:

«Tik Tak», 90 gr. - 10.3 rubles;
"Selena Antizora" 90 gr. - 6.90 rubles;
«Chirton» 60 gr. - 23.5 rubles.

At once there was a question, why for "Mr. Muscle" it is necessary to pay so dearly? Maybe this is the most usual surcharge for a brand.

"Mr. Muscle" 500 ml. - Gel

With this gel can dissolve:

Hair;
Food remnants.

Can be used in all pipes, regardless of the material of manufacture. Very thick, highly concentrated gel, able to quickly penetrate the tube, and it does not stop even standing water. Approximately 15 minutes it will be necessary to eliminate complex clogs. At the same time, he will destroy harmful microbes, remove unpleasant odors.

How to use:Half the capacity should be poured into standing water. Wait 15 minutes. Rinse the drain pipe with boiling water. The contents of the bottle is designed for two applications.

To remove heavily clogged pipes, you need to pour in more than half a bottle and increase the waiting time. It is very important to comply with safety regulations. After contact with skin, a burn may occur. Work only in gloves.

The composition of "Mr. Muscle" includes:

Water;
Sodium hypochlorite - less than 5%;
Sodium hydroxide;
Amphoteric surfactant - less than 5%;
Soap - less than 5%;
Sodium silicate;
Sodium polystyrene sulfonate.

Helpful advice! It is very important that the exposure time is in accordance with the manufacturer's recommendations. Active substances benefit only in the specified period of time. In the future they become useless and even harmful.

Bagi Pothan

A strong effective tool for cleaning pipes is intended for removal:

Paper;
Calcareous plaque;
Food waste;
Fat.

The chemical does not react with plastic and metal.

The composition of Bagi Pothan includes:

Sodium hydroxide;
Detergents.

How to use:From the sink you need to completely remove the water. The room should be well ventilated. In the hole carefully pour half a glass of substance (70-100 grams). The bottle should be kept in the outstretched hand, while turning the head to the side. Then pour half a cup of boiling water, trying to stay away from the drain hole. After three minutes, flush the pipe with hot running water. If the blockage could not be eliminated from the first time, all operations need to be repeated.

Buyers speak about this tool only on the positive side. This is a very effective tool, however, it is quite expensive.

The cost of Baga Pohtan starts from 500 rubles.

To use this tool, you must always remember the safety precautions.

If you do not comply with them, you can get a severe chemical burn.
The room must always work forced ventilation. In the absence of it, the room should be well ventilated.

Reviews

I decided to try this tool against clogging pipes. It easily eliminates any blockage. But it requires great care when working. It is very expensive.

However, after I read that for cleaning, you need only 50-70 gr., And the weight of the package is 600 g., I decided that the price of cleaning would not be too expensive. I had no doubt that I would have to use it again. At one time nothing happens.

When I saw a painted skull and crossbones on the package, I realized that this is a very dangerous tool that requires increased security measures. The instructions say that you only need to fill the granules, stretching out your hand. Even it became terrible.

Inside the package, I found the most common granules, very similar to "Mr. Muscle." Only the color was different. White granules were mixed with gray.

According to the instruction, I filled 70 grams of substance into the pipe and poured hot water. Right away the pipe began to twitch, there was a loud hiss, from it a strong spray flew with force. They hit me on clothes, I immediately felt a burning sensation. The room smelled of burnt hair, and it began to fill with steam escaping from the pipe. I had to open the window immediately.

As a result, the litter completely disappeared, in the bathroom and in the kitchen the water whistled downwards. Perhaps, this is the best means for cleaning the sewer pipes, which I tried.

Tiret Turbo

Gel "Tiret Turbo" is another popular remedy for blockages in pipes. It is much better to remove clogs than similar advertised products. The thick composition easily penetrates deep into the pipe, even if the shell is completely filled with water. This chemical removes all unpleasant odors, destroys microorganisms. The product can be used for cleaning metal and plastic pipelines.

Instructions for use: "Tiret Turbo" is poured into the sink drain. With a simple blockage, you need to wait 5 minutes. If after 5 minutes the blockage does not disappear, you will have to wait more than half an hour. Then rinse the drain hole with hot water under strong pressure.

Feedback from buyers about this drug and its effectiveness do not have an unambiguous answer. Someone, remained this drug, very satisfied, someone, his work did not like at all.

In some cases, the Tiret pipe cleaner is left in the pipes for 10 hours. The drug is kept in the pipe all night. It begins to be washed only in the morning. In this case, the manufacturer does not give any guarantee for the failure of the sewer pipes. This way of cleaning everyone takes at your own risk.

Composition of Tiret:

Chlorine-containing bleach - 5-15%;
Anions and non-ionic surfactants - less than 5%.

To effectively clean the pipe, the composition of the drug must include sodium hydroxide. In previous years it was so. Today this component is not part of the "Tiret". Why the manufacturer has removed it from the structure is unknown. This has led to the fact that now the drug simply is not able to clean the pipes.

Floup

High efficiency of the product is achieved by observing the necessary safety procedures. Granules can have several types. Some can be poured cold water, and some hot.

After pouring the heated water, the reaction begins to occur much faster. Use the pellets in the following sequence:

Powder is poured into the drain pipe;
After pouring warm water, you hear a characteristic hiss;

Expect about 3-15 minutes;

Pipes are washed under pressure, with plenty of hot water.

The means for cleaning the pipes "Flup" effectively removes:

Remains of food;
Collagen fibers;
Calcareous plaque.

Carrying out work with such a drug, you must always observe the maximum accuracy. Rubber gloves should be worn on the hands. The substance should not get on exposed skin. It is desirable to wear glasses on the eyes.

All who used this composition, speak about it only in a positive way. Sewer pipes are washed quickly enough without any problems.

"Deboucher"

DEBOUCHER (Deboshir) - A special product that cleans perfectly:

Sewer pipes;
Siphons;
Shells;
Toilets.

In addition, the drug removes:

Hair;
Paper;
Food remnants;
Organic pollution.

After using the "Debush", unpleasant odors disappear, all harmful bacteria are destroyed. The composition does not react with the plastic, does not violate the enamel coating.

Very important! Can not be used for aluminum pipes.

How to use

Each bottle has a special cover "protection from children". To open the bottle you need to press the top on the lid, make a turn, counter-clockwise. In the sink, pour 500 milliliters of funds to clean the sewer pipes. Wait about 1-2 hours. If there is a strong clog or a long pipeline, you need to pour out one liter of the drug and wait for the night. In the morning, flush the pipes with a strong stream of hot water.

Composition " Deboucher" It has:

Purified water;
Sodium hydroxide,
Sodium hypochlorite.

How to store

Only at a temperature not exceeding 20-22 degrees. The preparation should not be exposed to the sun's rays. If the preparation is stored frozen, after defrosting its properties are completely preserved. Before use, the bottle must be shaken.

Safety precautions

This strongly caustic substance should be kept as far away from children as possible. Do not use to clean aluminum products. Do not mix the preparation and detergents containing acids. At work it is necessary to protect eyes.

Direct contact with the skin should be avoided. If this happens, flush immediately with a strong stream of water.

"Mole"

This tool for cleaning pipes is very popular. There are quite a few species. The composition of this powdered preparation includes caustic soda.

To clean the blockage in the pipe, using the "Mole" you need to consistently perform the following operations:

The cleanser is poured into a drain of 40-120 ml of the preparation. Withstand about 2-3 hours;
The pipe is washed with a strong stream of hot water.

"Mole" shows very good results, for removal:

Fat;
Remains of food;
Collagen fibers.

It also removes the room from an unpleasant smell. The substance can be used as an excellent preventive agent.

The composition of Mole contains:

Sodium hydroxide;
Sodium sulfate.

I must say that this drug is manufactured by various manufacturers. Therefore, in each of them the amount of active substances may differ. The time of application of each drug is purely individual.

The effectiveness of cleaning from this does not change, but before using, you should carefully read the instructions.

For many years, "Mole" remains the most popular means when it is necessary to clean the sewage system. You can use it as a great preventive. Therefore, if you just badly merge water or you need to do a prophylaxis, the best means of blockages in the economy segment will be Mole.

«Chirton»

This means for cleaning pipes has its own peculiarity. It can only be used with cold water.

The composition effectively cleans:

Draining siphons;
Pipes;
Removes rust;
Dissolves dirt.

This substance can be used for preventive purposes to prevent the appearance of blockages. "Chirton" can be used as a disinfectant, as well as for removing various, unpleasant odors. This substance is safe for polymeric pipelines.

The instructions say that you can clean the sinks and baths. However, on the next line, it is indicated that it is not suitable for cleaning the bathroom. Probably, the manufacturer had in mind the presence of good ventilation.

Composition of Chirton preparation:

Caustic soda;
Soda nitrate;
Aluminum granules.

Package weight 60 gr. The granules are bright green. Such a volume is sufficient for one cleaning. Work with this drug should be very careful. Do not breathe poison gas and protect eyes.

The pellets are poured into the drain, then they are poured with water and aged for 15 minutes. Concepts of 15 minutes and instantly completely different, nevertheless on one side of the package it is written "instantly", and on the reverse "wait 15 minutes".

How to use chemical cleaners

Any such drug, requires very careful treatment. Before you start using it, you should definitely get acquainted with the instructions.

It will necessarily indicate the necessary protection measures. They have some differences, however, in general, they all have the same requirements:

Ventilation must be switched on;
Expand the windows;
Open the doors;
Hands should have gloves;
Be sure to use protective goggles.

When the product is poured or poured, the container should be held on an outstretched arm. The head should be kept as far as possible from the hole where the chemical is poured.

Chemistry for cleaning sewage pipes is very toxic. Work should be carried out with the respirator on, since the gases released can be very toxic.

To add water, you also need to stretch your arm.

When the reaction begins, it is forbidden to bend directly over the drain. First, the pipe is washed with a thin stream so that the composition does not splash.

Sometimes even the bottles themselves have an unpleasant chemical smell. They need to be taken out of the room as quickly as possible.

Conclusion

After analyzing the compositions and customer reviews, it becomes clear that the best means for cleaning pipes will be BagiPothan.But it also becomes the most dangerous, so carefully follow all safety rules and instructions for use.

Some products are not suitable for sewer pipes from a certain material. This is usually indicated immediately on the package, or written that it is suitable for all types or types of pipes. Therefore, in order not to change the wiring, make sure that your sink will withstand the purchased chemistry.